Introduction

COMMELL offers the embedded solid state disk as the boot and/or storage devices for the industrial embedded application with COMMELL's embedded SBC (Single Board Computer), industrial PC platform and/or integrated embedded software. 

Why CompactFlash

The main features to use the CompactFlash as the embedded solid state disk are as below.

- Driver Free, Bootable, IDE-based Industrial Embedded Solid State Disk

- Industrial Public Standard Interface (Not be Limited to Any Vendor)

- Economic Solution on High Flash Memory Capacity

- External Removable / Replaceable Storage Device

Why COMMELL

As an industrial PC solution provider, COMMELL continues take care of the quality and reliability rather than cost issue. The CompactFlash solution what COMMELL approval and advise is not only a low cost consumer item, but also the real "industrial level solution" to the industrial market. 

Cooperate with the Japanese-based vendor, Hagiwara SYS-COM Co., Ltd., the leading flash memory module developer in Japan, COMMELL provides the CFC meets the industrial demand on the reliability, compatibility and long term supply issues. The main features and advantages of COMMELL / Hagiwara SYS-COM solution rather than others are as below.

- Long Term Supply for Industrial Market

- Meet Industrial Rugged Application Environment

- Complete Product Verification in Japanese Laboratory

- High Reliability and Longer Life-time

Hagiwara SYS-COM Co., Ltd. is the tier one vendor of the flash data storage solution market in Japan. Established by 1971 and focus on flash memory application since middle of 90', Hagiwara be the key developer in the field of expansion memory modules. For the further information about Hagiwara SYS-COM please visit the website at http://www.hscjpn.co.jp 

Feature

-

Driver Free, Bootable, IDE-based Industrial Embedded Solid State Disk

-

Industrial Public Standard CompactFlash Interface

-

Low Profile, Compact Size, External Swappable Mechanical Package

-

CompactFlash Card (CFC) Type I

-

Support Modes : TrueIDE, PC Card Memory, PC Card I/O

-

Constructed with NAND Flash Memory (Toshiba)

-

Capacity from 16 to 512 MBytes

-

Can be Partitioned like a Conventional HDD

-

PIO Mode 4 of Host Interface

-

Advanced Data Protection with Built-in 48-bit "on-the-fly" ECC

-

Wear-leveling Algorithm with 1 Million of Program/Erase Cycle

-

Wide Temperature Range (-40 ~ 85oC) for OEM Project

-

Compliant with CFA Standard

Memory Capacity

16 ~ 512 MBytes

Operating Voltage

3.3V or 5V ±10%

Power Consumption (5V)

Sleep

1.3 ~ 2.0 mA (Max)

Read

20.0 mA (Typical)

Write

40.0 mA (Typical)

Power Consumption (3.3V)

Sleep

1.2 ~ 1.5 mA (Max)

Read

16.0 mA (Typical)

Write

38.0 mA (Typical)

Media Transfer Rate

Read

6.5 MBytes/sec (Max)

Write

3.2 MBytes/sec (Max)

Interface Transfer Rate

Read

16.6 MBytes/sec (PIO Mode4)

Write

16.6 MBytes/sec (PIO Mode4)

Temperature (Standard)

Operating

  0 ~ 70 oC

Storage

-20 ~ 85 oC

Temperature (OEM only)

Operating

-40 ~ 85 oC

Storage

-45 ~ 90 oC

Humidity

95% (Non-condensation)

Vibration

Operating

15 G (Max)

Shock

Non-operating

1000 G (Max)

Ordering Guide

Ordering Code

Memory Capacity

Memory Vendor

DCF-H032

32 MBytes

Toshiba

DCF-H064

64 MBytes

Toshiba

DCF-H128

128 MBytes

Toshiba

DCF-H256

256 MBytes

Toshiba

DCF-H512

512 MBytes

Toshiba